7.	Spare parts list, accessories and mounting instructions

Back to operating Manual

Table of contents

1. How to order

To ensure a correct spare part delivery, the following informations are necessary:

Numbers of pieces, Part No. and Description

The number of pieces does not have to be identical with the numbers in the columns "numbers" of the lists. The numbers give you only the information of how often a part is included in an assembly group.

Following informations are necessary for a correct order:

• Billing address
• Delivery address
• Name of contact persons for further inquiries
• Way of delivery

Caution

Please refer to the spare parts list if you wish to order any spare parts. Refer to the drawings mentioned in the spare parts list for further information.

We can only accept liability for original spare parts supplied by the factory.

We explicitly draw your attention to the fact that we have not checked or approved other spare parts which have not been supplied by the factory. It is therefore possible that the installation and/or use of such products may detrimentally affect the design characteristics of the equipment and may therefore jeopardize their active and/or passive safety. Any liability cannot be accepted for damage resulting from the use of other spare parts or accessories that have not been supplied by the factory.

Please bear in mind that manufacturing and engineering specifications often apply to factory and supply parts and that the spare parts that we offer are in accordance with the latest state of the art.

2.	Accessories

2.1	Deflector Zone

Part No. 0259 474 (Ø 22 mm)

Part No. 0259 475 (Ø 28 mm)

2.2	Nozzle cap ("gap")

Part No. 0260 928

2.3	Flat fan spray nozzle (assembly)

Part No. 0260 926

Item	Part No.	Quantity	Description
1	0260 280 *	1	Flat fan spray nozzle
2	9971 037 *	1	O-ring 22x1.5
3	0260 627 */**	1	Deflector cone Ø 13 (assembly)

* Wear part

** Only available as a set

2.4	Round spray nozzle, extension 300 mm PEM-T1

Part No. 0259 622

3.	Spare parts

3.1	Spraygun PEM-T1

Part No. 0259 003

Item	Part No.	Quantity	Description
1	0259 618	1	Gun housing PEM-T1
2	0259 270	1	Handle (right half) (assbl.) (with switch + ...)
3	0259 387	1	Handle (left half)
4	0259 308	1	Cover plate 1.)
5	0259 320	1	Outer nut
6	0259 472 *	1	Nozzle body PEM-T1
7	0259 474 *	1	Deflector cone   22
8	0260 629 *	1	Charging body, assembly
14	0259 459 *	1	Powder tube
15	9900 758	2	Filister head screw M6x20

* Wear part

1.) Item 4 and 37 must be ordered together. Pos. 37 must be pressed into Pos. 4.

Item	Part No.	Quantity	Description
17	0259 463 *	1	Connecting tube
18	0259 620 *	1	Valve box, assembly
19	0259 512 *	1	Air manifold
20	0260 468 *	1	Contact tube
21	9985 717	1	Threaded fitting M5
22	9982 076	0,1m	Hose ID3x1
23	0259 621	1	Check valve
24	0259 390 *	1	Adapter tube
25	9971 316 *	4	O-ring 12x1
26	0259 310	1	Pivot bolt
27	9930 804	1	Cylindrical shaft 3HBx14
29	9920 130	1	Washer A4,3 PA6.6
30	0259 451	1	Trigger
31	9994 284	1	Wavy washer
32	0259 294	1	Interconnect cable TP (6m long)
33	0259 382	1	Name plate PEM-T1 (not shown)
34	0259 383	1	Name plate PEM-T1 (not shown)
36	9974 005 *	2	O-ring 15x1
37	0259 466	1	Stopper 1.)
40	0259 473	1	Grounding tube
42	9971 196 *	1	O-ring 21x1.5

* Wear part

1.) Item 4 and 37 must be ordered together. Pos. 37 must be pressed into Pos. 4.

3.2	Charging body (assembly)

Part No. 0260 629

Item	Part No.	Quantity	Description
1	0260 632 *	1	Air nozzle (assembly)
3	0260 469 *	1	Deflector cone rod
4	0260 463 *	1	Central air guide
5	0260 470 *	1	Rod
6	0260 476 *	2	Support ring
7	0260 472 *	1	Tip
8	0260 474 *	1	Ring
9	0260 471 *	2	Charging tube
10	0260 473	1	Threaded rod

* Wear part

3.3	Round spray nozzle, extension 300 mm PEM-T1

Part No. 0259 622

Item	Part No.	Quantity	Description
2	0260 632 *	1	Air nozzle (assembly)
4	0260 469 *	1	Deflector cone rod
5	0259 479 *	1	Adapter
6	0260 463 *	1	Central air guide
7	0260 470 *	1	Rod
8	0259 480 *	1	Threaded rod
9	0260 476 *	2	Support ring
10	0260 472 *	1	Tip
11	0259 477 *	1	Nozzle body
12	0259 478 *	1	extension
13	9971 009 *	1	O-ring 22x2

* Wear part