7.	Spare parts list, accessories and mounting instructions PJ 2020 PRS

Back to operating Manual

Table of contents

1. How to order

To ensure a correct spare part delivery, the following informations are necessary:

Numbers of pieces, Part No. and Description

The number of pieces does not have to be identical with the numbers in the columns "numbers" of the lists. The numbers give you only the information of how often a part is included in an assembly group.

Following informations are necessary for a correct order:

• Billing address
• Delivery address
• Name of contact persons for further inquiries
• Way of delivery

Caution

Please refer to the spare parts list if you wish to order any spare parts. Refer to the drawings mentioned in the spare parts list for further information.

We can only accept liability for original spare parts supplied by .

We explicitly draw your attention to the fact that we have not checked or approved other spare parts which have not been supplied by . It is therefore possible that the installation and/or use of such products may detrimentally affect the design characteristics of the equipment and may therefore jeopardize their active and/or passive safety. Any liability cannot be accepted for damage resulting from the use of other spare parts or accessories that have not been supplied by the factory.

Please bear in mind that manufacturing and engineering specifications often apply to factory and supply parts and that the spare parts that we offer are in accordance with the latest state of the art.

2. Spare parts PJ 2020 PRS

Part No. 0241 294

Item	Part No.	Quantity	Description
1	0241 402	1	Injector housing
2	0241 430*	1	Injector nozzle D 2,1
3	0241 407*	1	Nozzle (assembly)
3/3	9971 319*	1	O-ring 5x1.5
4	0241 408	1	Outer nut
5	0241 410	1	Check valve (cpl.) 1.)
6	9992 709	2	Coupling nipple
7	9992 710	1	Screw-in gland
8	9974 023*	1	O-ring EL conductive 16x2
9	9970 149	2	Seal
10	9970 150	2	Seal
11	0241 412	1	Check valve (cpl. with orifice)
12	0241 426*	-	Filter element 1.)
12	0241 459*	-	Hose 1.)

* Wear part

When dismantling check if the check valve is used with a filter element or a hose

3. Special Accessories

Part No.	Quantity	Description
9992 200	1	Plug-in nipple joint
9992 711	1	Coupling joint
0264 245	1	Grounding cable with banana plug Ø 4 m, 0,5 m long (second cable end with wire lug M6)